HB 6978-1994 卡销
作者:标准资料网 时间:2024-05-16 06:24:54 浏览:8973
来源:标准资料网
基本信息
标准名称: | 卡销 |
中标分类: |
航空、航天 >>
航空器与航天器零部件 >>
紧固件 |
ICS分类: |
航空器和航天器工程 >>
航空航天制造用紧固件 >>
销钉、铁钉
|
发布日期: | 1994-06-01 |
实施日期: | 1994-12-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
出版日期: | 1900-01-01 |
页数: | 2页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 航空 航天 航空器与航天器零部件 紧固件 航空器和航天器工程 航空航天制造用紧固件 销钉 铁钉
Product Code:SAE AMS5519
Title:Steel, Corrosion Resistant, Sheet and Strip, 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion-resistant steel in the form of sheet and strip.These products have been used typically for parts requiring moderate drawing or forming and high strength, but usage is not limited to such applications.Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
基本信息
标准名称: | 六角法兰面自钻自攻螺钉 |
英文名称: | Hexagon flange head drilling screws with tapping screw thread |
中标分类: |
机械 >>
通用零部件 >>
紧固件 |
ICS分类: |
机械系统和通用件 >>
紧固件 >>
螺栓、螺钉、螺柱
|
替代情况: | GB/T 15856.4-1995 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 |
发布日期: | 2002-12-05 |
实施日期: | 2003-06-01 |
首发日期: | 1995-12-19 |
作废日期: | 1900-01-01 |
主管部门: | 中国机械工业联合会 |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国紧固件标准化技术委员会 |
起草单位: | 机械科学研究院 |
出版社: | 中国标准出版社 |
出版日期: | 2003-06-01 |
页数: | 16开, 页数:7, 字数:9千字 |
适用范围
本标准规定了螺纹规格为ST2.9~ST6.3的六角法兰面自钻自攻螺钉。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用零部件 紧固件 机械系统和通用件 紧固件 螺栓 螺钉 螺柱